Revisiting Socks

After a small break in sock-making I made this pair for me.  The pattern came from Nancy Bush's book Knitting Vintage Socks.  I adjusted the pattern slightly by using only 60 stitches instead of the suggested 80.  Apparently I have narrow feet though I never thought so before I began making socks.  

The design on the sock is called a lozenge pattern.  It is a series of crisscrossing diamonds though it is a little difficult to make out in the picture unless you know what you are looking for.  I love diamond designs almost as much as I love spirals.  They are interesting to knit up and keep my interest as I go because it takes a bit of thought to figure out whether you are increasing the width of the diamond or decreasing and therefore where the purl stitches go.  I love to watch the diamonds take shape row by row.  

The yarn is by Austermann Step.  It is gorgeous, soft, squishy sock yarn.  I am in love with it and will definitely buy it again.  I got this yarn from The Loopy Ewe, my favorite yarn store.  If you are interested in visiting The Loopy Ewe online, I have a link on the right side bar under "favorite places."  You should check it out, it's awesome yarn!  The color I used for these socks is called Dune but there are loads of other equally beautiful colors made my Austermann Step.  Most or all of their yarn is self-striping.

I don't like trying to make my striped socks match exactly.  I prefer the fraternal twin look.  It gives the socks more character and makes it more obvious that I did not buy them.  Plus, Dobby would be proud.  Not being obsessive about matching exactly also prevents me from cutting off several feet of yarn in order to get to the same place in the striping patten.  Somehow I can never bring myself to cut the yarn to get to the beginning of the color sequence.  

Making this pair of socks has put me into a sock-knitting mood again.  I am now more than halfway finished with a pair for my husband too.  Yay socks!

A Jersey for Jenn

This is a jersey I customized for my sister-in-law. She recently lost her dad, who used to play minor league baseball, to cancer. My husband thought it would be more meaningful to get her a jersey like one he used to play in instead of just a card. He is so great at thinknig of gifts for people!

Jon found a jersey on ebay that was the same style as the one Jenn's dad wore to play. It had the team's name and logo on the front with a plain back. I made the letters and numbers and sewed them onto the back for the finished product pictured here.

I made the letters out of thick fusible interfacing and lining that would normally be used to line a dress. The lining was by far the closest match to the team name on the front for color and shine. It is a more flimsy material than the letters should be, but that is why I used the thick interfacing -- to make up for the thin lining.

To start, I traced the letters from the computer screen (we don't have a printer) from a font I downloaded at Abstract Fonts. The font matched the lettering on the players' jerseys very closely. The only difference was the curves, like in a "C" or "S" were softer on the actual jerseys. Not something a normal person would notice anyway. Just a crazy person like me. ;)

Next I cut out the characters from the tracing paper and traced them onto the interfacing. I cut those out and fused big squares of the red material onto the lettered interfacing. Since the red was such a thin fabric, it would have been nearly impossible to cut out the letters perfectly. But bonded to the interfacing, I was able to cut away the excess and ended up with a clean-cut letter (or number, as it were).

To make sure the name was in a straight line, I put masking tape along the lower line of where I wanted the letters. I put the tape on perpendicular to the pinstripes so that it would be straight. Then it was a simple matter to sew the letters into place. The pinstripes were a big help in making sure everything was straight up and down, especially for the numbers.

We framed the jersey with a picture of Jenn's dad to give to her.

Grkmwk's Quilt

Another LibraryThing friend recently had a baby and this is the quilt I made for her. She had told me the nursery was a jungle theme especially with monkeys and giraffes. I searched online for monkey prints and found the one I used in the block centers. It was so cute I definitely wanted to use it but I didn't buy it right away from the website. A couple of days later at JoAnn's I found the same print! I was in shock. JoAnn's never has cool stuff! I immediately bought a bunch and chose the supporting fabrics based on the monkey print. The supporting fabrics all came from Hancocks-Paducah.



The quilt ended up being about 55"x55". I was very happy with how it turned out. Sometimes it's hard to know just how much I'll like a finished product until it is a finished product. I was thrilled with this one. The blocks with the monkeys in the center are called snowball blocks. The ones with the leafy print in the center are called puss-in-corner blocks.

Here is a close-up of the monkeys. I love all their facial expressions! Too cute! The quilting is also more visible here. I did an all over zigzag because such forms are common in African art. My main goal in choosing a quilting design was not to have really obvious distracting lines running through the monkey faces. To mark the lines, I applied 1" masking tape all over the quilt in a zigzag and then quilted above and below the tape, using the tape as a guide for straight lines and corners. When applying the tape, at first I tried to measure each piece so that it was straight by the numbers. After a few attempts, I switched to making the lines look straight. That worked much better.

The binding and the back of the quilt are giraffe print. It took me ages to find a giraffe print. I looked in local fabric stores and combed the internet with no luck. After about a week of searching, I was at a quilter's guild meeting and a fellow member passed around a catalog for Hancocks-Paducah. I thumbed through the catalog with very little hope of finding a giraffe print but behold! They had two different kinds! I've been a loyal customer ever since. The corner pictured also has my signature, which I stitched in the same light color as the giraffe print, making it blend in like a giraffe in the shade. Later I wondered whether I should have used green or orange thread, but too late for second guessing myself. The quilt has been shipped and received.

Rissa's Quilt

I made this quilt for a friend who just had a baby and wanted the baby's theme to be pirates. The finished size is roughly 45"x55". I believe in big baby quilts.

The first fabric I found for this quilt was the blue pirate print, most visible on the outer border in this picture. It was flannel, and while I hadn't set out to make a flannel quilt, the print was perfect. There didn't seem to be many options in cotton pirates, so flannel pirates it was!

Each block is a little ship. The aqua fish print in the lower left corner is the water, the red stripe is the ship's hull, and the upper two triangles make up the sails. The blue pirate print sail is the fabric I first found for this quilt.

I machine quilted a skull and crossbones design into each block to give individual blocks more attention. Looking at the whole quilt, the red begs for attention so I wanted to put more focus into each ship block. An overall quilting motif would have blended the blocks into each other even more.



The skull and crossbones quilting is also visible here towards the left. The black print is the back of the quilt with my label in the corner. I embroidered the label by hand.

I machine pieced and quilted this so it could withstand going through the wash often.

Having made this following my huge king-sized quilt, it seemed to go quickly. Of course, this is only about a quarter of the size of the bed quilt. I cut out the pieces in late February but prom season interrupted all sewing-for-fun plans. I pieced, assembled, quilted, and bound the quilt in just a couple of days once I had most of the prom dresses finished and out of the house. I mailed it the day before the baby was born, which is good timing considering most of the quilters I know have baby quilts still in progress for babies turning 2 or 3 years old.

Socks Lately

Moving rather interrupted all craftiness, but here are two projects I completed just before the move:




These socks have cables that weave within each other all down the sock. I made them for a LibraryThing friend who wanted to give them to his wife for her birthday. The yarn was lovely to work with -- it's by Cherry Tree Hill, so that's not especially surprising.

Pictures don't do these socks justice. I think I need a new camera. :)

These were for another LibraryThing friend who got a blurb from her review published on the back cover of a book. I thought such an accomplishment deserved a pair of socks!

Once again, I'm not thrilled with the pictures. The pattern has little bunches that bring the surrounding stitches closer so that they sort of fan out towards the top, but it's difficult to make out the effect from the photos.

Herringbone Spiral Socks

The pillars and ladders socks went to my landlord and these ones went to his wife.

The stitch pattern for these socks is a multiple of six.  It's just *k3, s3wyif*.  I used 66 stitches to make them the correct diameter.  They have a nice amount of stretch to them and hug the foot well.  

In the background of the picture you'll see the chaos of packing.  I finished these the week we were moving.  Jon and I are now in our new house and loving it!  It is inspiring so many projects I can't wait to start!  

Cushions Complete!

All twelve of the cushions are now finished! The whole pile is pictured just below. They certainly look better than they did dressed all in orange vinyl.

The cushions on the bottom of the stack have wooden undersides. I'm not really sure whether these are the seats or the backs, though I think they are the backs. The seats, it seems to me, are the thinner ones on top.

The cording on the edges of the cushions was my least favorite part. I removed the cotton cords from inside the original material and resheathed them with the new fabric. That takes time!

This is the wooden side of the taller cushions. The original fabric being vinyl, it was just nailed down. But an unfinished edge of this material would have frayed, so I cut these out with a larger seam allowance than the originals and tucked about a half inch under before nailing them down with upholstery tacks.

I have made the process of old (pictured in a post below) to new look much too easy. Perhaps I should have photographed the messy part of dissecting the original cushions and cutting out these ones. No matter: the project is complete! On to the next one!